book and code



by Jamey 0 Comments

Wouldn’t it be nice if we could utilize the resources and bandwidth of AWS, while maintaining the privacy of a VPN? Well, look no further, because I seem to have stumbled upon a solution, and this one is going to be a doozy. The process that I am about to outline may not be the easiest method of achieving this goal, and I’m sure other methods exist (probably by utilizing some form of split tunneling), however, I tried this particular method, and it worked flawlessly to achieve my needs, and I figured I would share in order to help those in need of this niche form of connectivity. I don’t really see Amazon putting anything in place that would monitor or stop this behavior, so I’m going to go ahead and put this out there to help spread the privacy love.

The problem

If you have ever used AWS for red team penetration testing or “grayhat activities” such as scanning the entire Internet using tools such as masscan, you know that it can be a real pain in the ass when it comes to triggering their terms of service and having to provide an explanation of what happened and what you did to resolve the issue before getting your account shut down. If you are familiar with AWS, you will know that there is no shortage of information on setting up VPNs in AWS, but most of that documentation surrounds point-to-point or site-to-site VPNs.

If you want to hide your home network traffic from your ISP, you simply use a VPN client, but if you aren’t using split-tunneling, or if your VPN client doesn’t provide that capability, then you know that all traffic is going out through the VPN interface, and you lose access to the host from your local network.

Such is the case when trying to use a VPN remotely. If you are connecting via SSH, as soon as you activate the VPN adapter, all traffic is forced through the VPN interface, including your SSH session, which causes it to either die or hang indefinitely, and you will be unable to re-connect to your remote instance until normal connectivity has been established.

The solution

I’ll go ahead and provide a TL;DR up front before going into all the details: use an AWS Nitro-based instance, which provides you with browser-based access to the serial console.

In this example, we are going to use Ubuntu 20.04 and set up an instance type c5n.4xlarge, which gives us a 25G network connection and 16vCPUs, which isn’t enough to require an explicit request to increase the number of vCPUs available (and also includes 42G of RAM). This should be enough for our requirements to scan the Internet at a decent speed, although if you are scanning for multiple ports, you may want to fill out the request to increase your vCPU quota, which will allow you access to the instance types with an even larger network connection. The c5n.4xlarge instance type currently runs you $0.864/hour (just under $650/month — not including traffic and storage), and if you are worried about that, then you are more than likely not thinking like a hacker. Should creating a throwaway account make you feel guilty? Not in the slightest. Bezos can afford us this simple pleasure in life, and it doesn’t go without effort on the part of the user, so I feel like I can use one when the need arises, while at the same time having a negligible effect on my sense of morality. Anyways, we’ll set this c5n.4xlarge Ubuntu guy up with a 100GB IO2 SSD, and we’re good to go.

If you are wanting to maintain one of these high-bandwidth VPN instances, the cheapest I saw was the a1.medium with a 10G connection, 1vCPU, and 1GB of RAM, currently running at $0.0255/hour (costing you just under $20/month, excluding traffic and storage).

Preparing for serial access

You will need a user with a password for accessing the serial console. For the purposes of this example, we are going to use the username serialuser and password password123$, so go ahead and SSH into this instance, and create the user:

sudo adduser serialuser

Continue with all of the defaults, and then we need to add this guy to sudoers:

sudo usermod -aG sudo serialuser

On Amazon Linux (or other RHEL-based distros like CentOS), you would just replace the sudo group with the wheel group in the above command.

Finally, I like to make sure that everything is fully-updated before I begin my fuckery, so let’s go ahead and get everything in order (if you want to add NOPASSWD:ALL in /etc/sudoers, now would be the time to run sudo visudo):

sudo apt update
sudo apt dist-upgrade
sudo apt autoremove
sudo reboot

At this point, you should be able to select your instance in the AWS EC2 Console, and click Connect. Select the “Serial” tab, and make sure serial access is enabled, and click “Connect”. If you don’t see anything at all on the screen after a while, then go ahead and restart the instance via the console and repeat the same procedure, and you should see your instance booting and eventually be presented with a login prompt. Enter the credentials for serialuser that we created previously, and you’re good to go.

Example VPN setup

We’re going to use ProtonVPN as an example, and I have the Plus plan, but for the example, we’ll use the Basic (free) plan, so the connection location I choose may be different from the one you choose.

Let’s install the dependencies:

sudo apt install python3-pip openvpn dialog

We’ll be ignoring best practices during this example (hence already installing pip3 as an OS package). We will also be installing protonvpn-cli from PyPi, because I like that version better than the official version and feel like it’s easier to use.

sudo -H pip3 install protonvpn-cli

Like I said, no best practices in sight. Using sudo -H will install protonvpn-cli as root in /usr/local/bin, which is already in our $PATH.

Next, run the following command to enter all of your ProtonVPN information and get it all set up:

sudo protonvpn init

Next, we’re going to connect to the VPN within a screen session so that we can do other stuff in the serial console.

screen -LS vpn
sudo protonvpn c

Choose your server an protocol, and you should be connected. Finally, let’s take care of some DNS stuff real quick, since resolveconf can really try to burn you:

sudo mv /etc/resolv.conf /etc/resolv.conf.bak
cat /etc/resolv.conf.bak | tee /etc/resolv.conf

Before disconnecting from VPN, you will want to replace your original resolv.conf by running sudo mv /etc/resolv.conf.bak /etc/resolv.conf. You can disconnect from VPN after doing this by running protonvpn d, and your orginal DNS setting should be written back to /etc/resolv.conf.

Ctrl+A-D to get back to the normal console session and confirm by getting your current external IP and checking the information like in the example command/output below:

$ curl

$ curl
  "ip": "",
  "city": "Saint Petersburg",
  "region": "St.-Petersburg",
  "country": "RU",
  "loc": "59.9386,30.3141",
  "org": "AS206804 EstNOC OY",
  "postal": "190000",
  "timezone": "Europe/Moscow",
  "readme": ""



Ace of Spades by Faridah Àbíké-Íyímídé

by Jamey 0 Comments
Ace of Spades by Faridah Àbíké-Íyímídé

Ace of Spades was an amazing book that gives a very in-depth look at racism, classism, and sexual discrimination from a global perspective. The author is not from the U.S., and although I pictured the setting as taking place in the U.S., it just goes to show that these types of discrimination, including racism, are not just limited to our country.

The story follows two protagonists, a black male, and a black female, and each chapter is written from one of their perspectives. Ace of Spades is not some sort of social justice warrior gibberish — it’s a wonderfully-written story that actually inspires the want for social justice in a world where the playing field is uneven from the jump-off.

Right off the bat, this book tells you that it is like Gossip Girl meets Get Out, and I couldn’t describe it more perfectly than that. It has all the right aspects from both of those things, combined into a single masterpiece.

This post is less of a book review and more of a perspective on how I myself have seen and interacted with these issues over the course of my lifetime.


DEF CON 29 Takeaways (and missing out on a CVE)

by Jamey 0 Comments
DEF CON 29 Takeaways (and missing out on a CVE)

I started attending DEF CON in Las Vegas a few years ago in 2018, so I guess I could be considered a newb in the eyes of The Con, but because I work in the field of cybersecurity, my work would reimburse all expenses, so it was a sweet deal. I instantly fell in love with everything there, and I met some new friends, who I would later discover to be brothers. I was inducted into The Illuminati Party at DEF CON 26, and upon entering the IP Suite the next year at DEF CON 27, when I was met by the big booming voice of, “Welcome Home,” it truly did feel like home.

Last year, because of the pandemic, DEF CON was actually cancelled, and instead we had the first ever DEF CON Safe Mode, which took place entirely online. I missed being around all my hacker friends in person, but it was still a great year. This year, DEF CON 29 was a hybrid of both on-prem and online events, so it was a bit scattered. My workplace is still on a business travel lockdown, and I wasn’t going to make things difficult, so I opted to stay at home and enjoy the virtual side of things, and The Illuminati Party did the same — conducting all of their private talks and events on a private Discord server.

In this post, I will go over some of the high points (and bittersweet points) of DC29.


The Inheritance Games by Jennifer Lynn Barnes

by Jamey 0 Comments
The Inheritance Games by Jennifer Lynn Barnes

I have always been a sucker for real life puzzles and cryptography. I am also a fan of realistic fiction. Jennifer Lynn Barnes captures both of those qualities in her excellent book, The Inheritance Games. I have heard that this book has lots of aspects of Knives Out, and while I “own” that movie, I haven’t watched it yet, so I can only say that it has some Clue vibes to it, without being tropey.


The Raven Cycle by Maggie Stiefvater

by Jamey 0 Comments
The Raven Cycle by Maggie Stiefvater

What is the difference between a dream and reality? Does our subconscious mind have the ability to alter the physical world around us? If so, then how do your thoughts affect dreams, and what affect does that have on your physical reality? When I read fiction, these are the types of questions I want the author to evoke from my mind, and Maggie Stiefvater has done just that with her four-part series, The Raven Cycle.